|
 |
|
| |
Products >
Security Lighting > TWH |
|
| |
 |
| |
Die-Cast Wall Paks, Glass Refractor
70W - 400W HPS; 100W - 400W MH
|
|
|
|
TWH
Height: 15-1/4 (40)
Width:16-1/4 (41.3)
Depth: 8 (20.3
)Weight: 26-42 lbs (12-19kg)
|
|
- For outdoor storage areas, warehouse and factory perimeters and loading docks. (Contact with a direct forceful spray of water during operation can result in glass breakage. Not recommended for car wash application).
|
|
- Housing – Rugged, die-cast aluminum housing. Corrosion-resistant captive external hardware includes slotted hex-head fasteners. Standard finishis dark bronze (DDB) corrosion resistant polyester powder. Other architectural colors available.
- Optics – Reflector is specular anodized aluminum. Refractor is prismatic borosilicate glass.
Lens is sealed and gasketed to inhibit entrance of outside contaminants.
- Electrical – 70-150W HPS and 100-150M: High reactance, high power factor. All others: Constant
wattage autotransformer. Ballasts are copper wound and 100% factory tested. UL Listed. Electrical components mounted inhinged front cover that includes primary and secondary electrical disconnect.
- Socket – Glazed porcelain (mogul based; 175Mand above; medium based: 150M, 150S and below), horizontally oriented with copper alloy, nickel-plated screw shell and center contact. ULListed 660W,
600V for medium base; 1500W, 600V for mogul base. 4KV pulse rated.
- Installation – Back housing is separated from front housing, eliminating ballast weight and promoting easy handling. Top 3/4" threaded wiring access. Back access through removable 3/4" knockout. Mount on any flat, non combustible vertical surface.
- UL Listed (standard). CSA or NOM Certified
(seeOptions). UL Listed for wet locations. IP65 rated(250W and below) or IP54 rated (400W).
|
|
| |
|
